NOVA 300 M-A (DAB103005724)

Pump body, impeller, cap and suction grid in technopolymer. Motor, rotor shaft and screws in stainless steel. Triple O-ring seal interposed with an oil precombustion chamber. Continuous duty submersible asynchronous motor. Stator fitted in an airtight stainless steel casing. Rotor mounted on overdimensioned, greased-for-life ball bearings. Built-in thermal and current overload protection and a capacitor permanently on in the single-phase version. For the protection of the three-phase motor it is advisable to use a suitable overload protection complying with the regulations in force.

• Submersible, asynchronous, continuous duty motor
• Built-in thermal-current protection device and capacitor permanently on in the single-phase version
• To protect the three-phase motor it is advisable to use a magnetic starter with overload and undervoltage protection in compliance with current standards
• Made in accordance with CEI 2-3 standard and CEI 61-69 (EN 60335 – 2 – 41)
• Liquid temperature range from 0°C to +35°C (EN 60335 2 41 for domestic application)
• Electric plug supplied as a standard feature for the single-phase version
• Protection level: IP 68
• Insulation class: F
• Shaft version SV 431
• Pumped liquid: NOVA – muddy water without fibres
• Max immersion depth: 7 metres
• Operating range: from 1 to 16 m³/h with head up to 10.2 metres
• Granulometric passage: NOVA 180 - 200: 5 mm, NOVA 300 – 600: 10 mm, FEKA 600: 25 mm
  

Note: A = automatic with float, NA = non automatic without float